LED Profiles

LED Skirting Profile – 2.4m

Name: LED Skirting Profile – 2.4m
Brand: QIC Direct
SKU: LED0524009010
Price: 40.3 GBP
Availability: InStock

SKU: LED0524009010

£40.30

£48.36 Inc VAT

In stock - Same day dispatch before 2pm

About this product

✓PLASTERED-IN FINISH
✓12.5MM PLASTERBOARD
✓2.4M LENGTHS
✓OPAL DIFFUSER INCLUDED

Quantity

Free UK DeliveryOn hardware orders £200+

Money-back guaranteeBuy with confidence

Expert adviceHere to help

Key Features

Skirting LED profile
Skirting LED profile for low-level linear lighting.
Plastered-in finish
Designed for 12.5mm plasterboard and plastered in for a clean, seamless finish.
Opal diffuser included
Supplied with an opal diffuser for soft, even light with no visible LED dots.
2 stock finishes
Stocked in RAL 9010 white and RAL 9005 black. Other RAL colours POA.
Bulk discounts
Discounts available based on quantity purchased - ideal for multi-room projects.
Built for the trade
Made for trade installers, electricians, kitchen and bathroom fitters and fit-out contractors.

Skirting LED Profile - 2.4m - LED-05

Skirting LED profile for low-level linear lighting. Designed for use with 12.5mm plasterboard, these LED drywall profiles are plastered in for a clean, seamless finish.

Length: 2400mm
Includes an opal diffuser
Stocked in RAL 9010 and RAL 9005 (Other RAL colours POA)
Built for trade installers, electricians, kitchen and bathroom fitters, and fit-out contractors
Shipping - long lengths rate applies (see shipping rates page)
Bulk discounts available based on quantity purchased
LED strip not included

<table><tbody><tr><td>Product Type</td><td>Skirting LED drywall profile (LED-05)</td></tr><tr><td>Length</td><td>2400 mm</td></tr><tr><td>Material</td><td>Aluminium 6063-T6</td></tr><tr><td>Plasterboard</td><td>12.5 mm</td></tr><tr><td>Diffuser</td><td>Opal (included)</td></tr><tr><td>Finish</td><td>RAL 9010 / RAL 9005 (other RAL POA)</td></tr><tr><td>LED Strip</td><td>Not included</td></tr><tr><td>SKU</td><td>LED0524009010 / LED0524009005</td></tr></tbody></table>

Is the LED strip included?

No. The profile is supplied with an opal diffuser; LED strip is not included.

What plasterboard does it suit?

These LED drywall profiles are designed for use with 12.5mm plasterboard and are plastered in for a seamless finish.

What colours are available?

Stocked in RAL 9010 and RAL 9005. Other RAL colours are available - price on application.

How much is delivery?

Long lengths shipping rates apply. If you order several product groups you only pay the single highest shipping rate. See our shipping rates page for details.

What's included

1 x 2400mm LED skirting profile
1 x opal diffuser
Chosen finish (RAL 9010 or RAL 9005)
LED strip not included

Downloads

LED Skirting Profile – 2.4m – Technical Datasheet

Buying & Installation Guide

How to fit your skirting LED profile (LED-05)

1 · Plan the run & power

Decide where the LED driver and power feed will sit, and run the cable before boarding. LED-05 is a 100mm-tall skirting, so stop the 12.5mm plasterboard at skirting height.

2 · Cut to length

Cut to length with a fine-tooth aluminium blade and de-burr the ends. Mitre internal and external corners for a neat return.

3 · Fix the profile

Sit the profile on the floor with the plastering fin lapping onto the face of the board, and fix through the pre-punched diagonal slots in the plastering fin with standard drywall screws.

4 · Tape & joint

Tape and joint over the plastering fin, then skim and decorate so the fin disappears into the wall. Keep plaster out of the LED channel.

5 · Fit LED tape & diffuser

Stick your LED tape into the 12.5mm-wide channel, connect to the driver, then push the opal diffuser up into the channel until it clicks home.